Warehouse Fence Systems
Warehouse Fence Systems
Overview
Form a sturdy wall of protection between your employees and your inventory with Cogan wire mesh rack guards. Rigid and resilient, our rack guards bolt directly to pallet uprights, effectively placing a barrier between stored materials and the picking aisles below. Your workers will remain safe from falling debris should a forklift bump the racking or if a pallet breaks.
Boasting an exceptional all-welded angle-frame, our rack guards are engineered tough for dependable, long-lasting protection. Rugged 2” x 2” x 10GA welded wire mesh panels are wear-resistant to meet the rigorous demands of industrial use. The wire mesh construction also means your inventory is visible at all times, allowing for fast visual assessment and proper ventilation. Simple nut-and-bolt assembly makes installation quick and easy to minimize costs and maximize savings. All Cogan wire mesh rack guards are sealed in a durable powder-coated paint for a maintenance-free finish.
Cogan rack guards can be ordered with flush or offset mounting brackets to accommodate pallet overhang. If rack guards must extend above the top of the racking, we also offer a special angle bracket to support the exceeding panels. This means our rack guards will always fit the full-height of your rack frame to prevent product and pallet spills. Costly replacement expenses will be limited, while employees working near the racking or walking through pallet aisle ways will remain protected. Two types of mounting brackets are available to accommodate both roll-formed and structural rack uprights.
![Untitled (1080 x 1080 px) - 2024-07-26T120954.080 Untitled (1080 x 1080 px) - 2024-07-26T120954.080](https://www.equipworld.com/hubfs/Untitled%20(1080%20x%201080%20px)%20-%202024-07-26T120954.080.png)
Benefits
Enhanced Safety:
- Forms a sturdy wall of protection between employees and inventory, preventing injuries from falling debris due to forklift bumps or pallet breaks.
Durable Construction:
- Features an all-welded angle-frame and 2” x 2” x 10GA welded wire mesh panels that are wear-resistant, ensuring long-lasting and reliable protection.
Visibility and Ventilation:
- Wire mesh construction allows for clear visibility of inventory for fast visual assessments and proper ventilation, maintaining a safe and efficient workspace.
Easy Installation:
- Simple nut-and-bolt assembly minimizes installation time and costs, providing a cost-effective safety solution.
Customizable Fit:
- Offers flush or offset mounting brackets to accommodate pallet overhang and special angle brackets for panels that extend above the racking, ensuring a perfect fit for any rack frame height.
Low Maintenance:
- Sealed with durable powder-coated paint for a maintenance-free finish, reducing upkeep costs and effort.
Versatile Mounting Options:
- Two types of mounting brackets available to accommodate both roll-formed and structural rack uprights, providing flexibility in installation and application.
Cost Efficiency:
- Limits costly replacement expenses by protecting products and pallets from damage, while ensuring the safety of employees working near or walking through pallet aisle ways.
Wire Mesh Partition Kits
Model: KD087
Description
- Used where restricted access is required
- Bolt-down posts and reinforced panels provide the strength that your application demands
- Standard STOCK SIZES include all basic bolt-together hardware required for fast and easy installation
- Sliding door which may be located on any side, opening left-to-right or right-to-left
- Models with roof provide maximum security
- CUSTOM SIZES can be designed to suit your special application regardless of the size required
![different (42) different (42)](https://www.equipworld.com/hubfs/different%20(42).png)
Wire Mesh Rack Guards - Panels
Product Description
Form a sturdy wall of protection between your employees and your inventory with Cogan wire mesh rack guards. Rigid and resilient, our rack guards bolt directly to pallet uprights, effectively placing a barrier between stored materials and the picking aisles below. Your workers will remain safe from falling debris should a forklift bump the racking or if a pallet breaks.
Boasting an exceptional all-welded angle-frame, our rack guards are engineered tough for dependable, long-lasting protection. Rugged 2” x 2” x 10GA welded wire mesh panels are wear-resistant to meet the rigorous demands of industrial use. The wire mesh construction also means your inventory is visible at all times, allowing for fast visual assessment and proper ventilation. Simple nut-and-bolt assembly makes installation quick and easy to minimize costs and maximize savings. All Cogan wire mesh rack guards are sealed in a durable powder-coated paint for a maintenance-free finish.
Cogan rack guards can be ordered with flush or offset mounting brackets to accommodate pallet overhang. If rack guards must extend above the top of the racking, we also offer a special angle bracket to support the exceeding panels. This means our rack guards will always fit the full-height of your rack frame to prevent product and pallet spills. Costly replacement expenses will be limited, while employees working near the racking or walking through pallet aisle ways will remain protected. Two types of mounting brackets are available to accommodate both roll-formed and structural rack uprights.
Case Study
Wire Mesh Rack Guards
More solutions for You
You might also be interested in our other solutions.
Contact Us Today
Have a project in mind? Need a few more details? Fill out the form and we will get back to you as soon as we can.