Guardrails
Guardrails
What is Guardrails/ Roofguards
RoofGuard is a freestanding modular guardrail system that is counterweighted in order to meet lateral force requirements. This design facilitates swift and effortless installations without the need for welding, drilling or bolting into the actual roof structure. Without direct or permanent attachments to the rooftop, resealing is not required, ensuring that unexpected leaks do not occur.
With our all-new, redesigned nesting baseplates are stackable, which allows for a number of benefits such as stability on various roof surfaces, ease of use when installing (moving baseplates to different areas of a job site) and use on metal, various membranes and BUR style roofing. Furthermore, RoofGuard can be reconfigured during installation to work in almost any situation. Options are available in convenient kit formats or custom solutions as required.
Have peace of mind knowing that each of our RoofGuard Rooftop Guardrail systems comes with a sign-off from our in-house engineering team. And as a passive solution, RoofGuard Rooftop Guardrail is the preferred method of fall protection as training your staff is not required.
The RoofGuard Classic system is designed to protect the most common working at heights hazard, a rooftop or any other exposed edge. Distance from the edge of an elevated surface is the key factor when it comes to this type of hazard. If someone is within 6 feet of the edge of a rooftop or other exposed edge that is 3 metres (10 feet) or more above the ground, fall protection is required. Some scenarios have a lower height requirement (above dangerous machinery, hazardous materials, etc.) which we have covered in an article called Working at Heights Legislation and Guardrail Fall Protection in Canada.
![Untitled design - 2024-07-29T152301.065 Untitled design - 2024-07-29T152301.065](https://www.equipworld.com/hubfs/Untitled%20design%20-%202024-07-29T152301.065.png)
12 Foot Kit | RoofGuard Classic
Product Overview
Twelve feet of leading edge Fall Protection. The RoofGuard 12 foot kit is ideal for providing reliable fall protection around HVAC units, vents, near access ladders, antennas, valves, solar panels, or near exposed areas that require routine maintenance.
This system is equipped with a variable fitting in the centre to allow for straight or 90 degree setup, two 6′ returns (ballast), aluminum handrail tube, cast aluminum magnesium fittings, base plates, rubber pads and an installation tool.
![Untitled design - 2024-07-29T152421.089 Untitled design - 2024-07-29T152421.089](https://www.equipworld.com/hubfs/Untitled%20design%20-%202024-07-29T152421.089.png)
18 Foot Kit | RoofGuard Classic
Product Overview
Our most popular rooftop guardrail design offers eighteen feet of leading edge Fall Protection, with two six foot sections for weighted ballast. The hinged, variable fitting in the centre of the 18 ‘ section allows for complete versatility when installing the system. It can be straight, at 90 degrees or anything in between.
The best way to ensure the safety of your workers is to plan ahead and implement a fall prevention solution within the areas of your rooftop that require access. Custom configurations available depending on your unique application.
![Untitled design - 2024-07-29T152540.944 Untitled design - 2024-07-29T152540.944](https://www.equipworld.com/hubfs/Untitled%20design%20-%202024-07-29T152540.944.png)
27 Foot Kit | RoofGuard Classic
Product Overview
Twenty-seven feet of leading edge Fall Protection with two six foot sections for weighted ballast. Two hinged fittings allow for complete versatility when installing the system. It can be straight, at 90 degrees, or anything in between, depending on your requirements.
Our largest RoofGuard Rooftop Guardrail System and it is designed to allow for the maximum amount of both linear coverage and flexibility, ensuring that your employees or contractors are protected around a wide variety of different potentially dangerous situations on your rooftop. These are typically used for edges that have multiple units that are unprotected in a row.
![Untitled design - 2024-07-29T152839.193 Untitled design - 2024-07-29T152839.193](https://www.equipworld.com/hubfs/Untitled%20design%20-%202024-07-29T152839.193.png)
Custom | RoofGuard Classic
Product Overview
Our custom kits are designed for multiple application purposes so that you have a readily available system to ensure that your rooftop is safe. For applications that require something unique, we have our custom rooftop guardrail system because everyone should be able to work safely and with confidence, whether they are in an office or on a rooftop.
These rooftop guardrail systems were designed with one thing in mind, to have a rooftop guardrail system available for everyone, because safety should never take a back seat.
RoofWalk (Non-Slip Walkways)
Product Overview
RoofWalk is designed to create a sure footed walkway on your rooftop. This fully customizable walkway system is non-slip and is installed above the roof membrane (much like RoofGuard itself). Not only does this system protect your roof from damage by being non penetrating but it also integrates with other RoofGuard systems like Classic, RoofStep and LadderGuard.
![feature-roofguard-walkway-series-300x206 feature-roofguard-walkway-series-300x206](https://www.equipworld.com/hubfs/feature-roofguard-walkway-series-300x206.jpg)
RoofGuard XPress (Temporary Guardrails)
Product Overview
RoofGuard Xpress is designed with pre-fabricated rail sections which can be installed and dismantled quickly for temporary applications without sacrificing quality or safety. These systems are freestanding and non-penetrating so they require no holes in your roof membrane to install.
![img-RoofGuard-XPress-Installation-at-a-Retail-Store-04-300x229 img-RoofGuard-XPress-Installation-at-a-Retail-Store-04-300x229](https://www.equipworld.com/hubfs/img-RoofGuard-XPress-Installation-at-a-Retail-Store-04-300x229.jpg)
RoofGuard Platforms
Product Overview
Liftsafe Fall Protection designs, engineers and fabricates custom rooftop maintenance platforms to protect your employees while working at heights. Equipment maintenance may require elevated access on a rooftop, which can put employees at risk. The use of railed platforms surrounding the equipment will eliminate the risks while improving work performance and productivity.
We work with a number of different industries (including the aviation industry) and our products meet the highest standards.
![img-LFP-Roofguard-Platform-GuardRail-Specs-Details-300x200 img-LFP-Roofguard-Platform-GuardRail-Specs-Details-300x200](https://www.equipworld.com/hubfs/img-LFP-Roofguard-Platform-GuardRail-Specs-Details-300x200.jpg)
More solutions for You
You might also be interested in our other solutions.
Contact Us Today
Have a project in mind? Need a few more details? Fill out the form and we will get back to you as soon as we can.