Light Towers
Wacker Neuson LTW 20Z1-V S
LTW 20Z1-V S
Excellent lighting and increase uptime
The standard five-section vertical mast light tower is hydraulically actuated, decreasing the time needed to set up on jobsites. The light bar design creates greater flexibility in directing the four metal halide light fixtures for greater light coverage on the jobsite. The wide body design features reliable engine options, long run fuel tank and DOT trailer lights. The vertical mast light towers are perfect for urban or remote applications including general jobsites, highway and bridge construction and industrial applications.
- Hydraulically operated five-section tower extends in ten seconds, increasing east of operation and uptime.
- Range of motion of light fixtures allows the user to aim the lights vertically or horizontally without blocking each other. Easily adjustable light fixtures equipped with a lockable T-handle, heat shield, and light aiming handle provides protection from the heat of the lamps.
- Large capacity fuel tank allows for long run times and continuous lighting.
- Multiple power outlets for both 120V and 120/240V ensure maximum power convenience on the job site. On 3-phase model, a 60A 120/208V, 3-phase receptacle is also available.
- Control panel features an electronic engine controller, main circuit breaker, individual light breakers and hour meter. Additional factory-installed options provide added versatility for unique applications.
Specifications
LTW 20Z1-V S | ||||
---|---|---|---|---|
Operating data |
||||
L x W x H in | 131 x 75.5 x 101 | |||
Operating weight lb | 3,345 | |||
Shipping weight lb | 2,935 | |||
Illumination coverage @ 5 fc(54 lux)ft² | 12,960 | |||
Lamp type | Metal Halide | |||
Mast height ft | 25 | |||
Sound level (LwA) dB(A) | 71.2 | |||
Power Output kW | 18.6 | |||
Frequency Hz | 60 | |||
Voltage V | 120 / 240 | |||
Power factor cos Φ 1~ | 1 | |||
Power factor cos Φ 3~ | ||||
Engine / Motor |
||||
Generator model | Mecc Alte ECO 28-VL/4 | |||
Generator insulation (class) | H | |||
Idle to full load % | 1.5 | |||
Voltage control Steady State % | 1 | |||
Engine / Motor manufacturer | Isuzu | |||
Engine / Motor type | 4LE2-NYGV02 | |||
Fuel type | Diesel #2 - ULSD | |||
Displacement in³ | 133 | |||
Operating performance hp | 34.3 | |||
at rpm rpm | 1,800 | |||
Tank capacity Oil US qt | 8.5 | |||
Tank capacity Fuel US gal | 57 | |||
Fuel consumption @ Prime LoadUS gal/h | 1.58 | |||
Fuel consumption 4 Lights Only US gal/h | ||||
Runtime @ Prime Load h | 34.8 |
×
Request information about Wacker Neuson LTW 20Z1-V S
Call here for more information about Unit#: LTW 20Z1-V S
Or fill out the form below