Metabo (Hitachi) NP18DSAL
Metabo (Hitachi) NP18DSAL
Pin Nailer

Metabo (Hitachi) NP18DSAL

NP18DSAL 18V Lithium Ion 23Ga Pin Nailer

Covered by Hitachi's Lifetime Lithium Ion tool warranty, the NP18DSAL Pin Nailer is taking fine finish carpentry to the next level. No longer will you have to worry about hoses and compressor for your 23-gauge pin nailer needs. It is equipped with a built-in counterweight that virtually eliminates all recoil, while reducing the force needed to actuate the tool. It also features a no-push work contact safety tip that reduces marring to provide a clean finish. Additional features include tool-less depth of drive adjustment, dry-fire lockout, on-tool battery indicator, belt hook, soft grip handle, and tool body rubber bumpers. The NP18DSAL is capable of driving approximately 3,000 pins with Hitachi's Compact 3.0Ah battery, allowing you to efficiently and comfortably complete any task. Available  as a tool body only, this 23-Gauge cordless pin nailer drives pins in lengths of 5/8", 3/4", 1", 1-3/16" and 1-3/8" and can be used to produce nearly invisible holes for a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly.

Features

  • Built-in counterweight greatly reduces recoil
  • Powered by a Compact 3.0Ah Lithium Ion battery that is 3/4" shorter and .6 lbs lighter than a conventional 3.0Ah battery for complete portability
  • Freedom from cumbersome air hose and compressor saves time in setup, during applications, and in jobsite clean up        
  • Slim nose design allows nailing into the grooves of any trim
  • No-push safety nose tip reduces marring and provides a clean finish
  • Tool-less depth of drive adjustment for a professional finish every time
  • High-luminescence LED light is handy when working in low light areas
  • Ergonomically formed soft grip handle provides comfort and ensures a secure hold
  • Automatic power shut off after 30 minutes of inactivity, for added safety
  • Dry-fire lockout for assured nail placement and preventing damage to work surface
  • Low battery indicator light on tool allows the user to see battery power status to prevent unexpected downtime
  • Detachable no-mar nose cap protects work surfaces from scratches or indentations
  • Integrated belt hook can be mounted on either side of the nailer to accommodate left or right handed users
  • Straight magazine holds 120 23-gauge pins in lengths of 5/8", 3/4", 1", 1-13/16" and 1-3/8" 
  • Capable of driving 3,000 nails per charge using Hitachi's Compact 3.0Ah Li-Ion battery (one battery is included in the kit, additional Compact 3.0Ah Li-Ion batteries sell for only $39.99 or $29.99 for a 1.5Ah Li-Ion battery)
  • Tool body rubber bumpers protect the tool and any surface from damage
  • (2) No-mar nose caps for flat or angle pin driving
  • Compatible with all Hitachi 18V Lithium Ion slide type batteries
  • Lightweight at only 4.4lbs for balance, maneuverability and minimal user fatigue while ideal for overhead and extended use applications

Includes:

  • (1) Compact 3.0Ah Lithium Ion Battery BSL1830C (339782)
  • Fast Charger (UC18YKSL)
  • Contractor Bag (371108)
  • Safety Glasses (875769)    
  • 3mm Hex. Bar Wrench (943277)
  • No-mar Nose Cap Set (370901)

Specifications

Nail Gauge

23-Gauge, Pin Nails

Nail Length

5/8", 3/4", 1", 1-13/16", 1-3/8"

Magazine Capacity

120

Magazine Angle

0 Degree, Straight

Battery Type

Lithium Ion

Battery Amp Hour

Compact 3.0Ah

No. of Batteries

1

Belt Hook

Variable Position

Depth of Drive

Tool-less

Driving Speed

2-3 Nails/Sec

Nails per Charge

Up to 3,000

Firing Modes

Sequential

Battery Charge Indicator

Yes

LED Light

Yes

Weight

4.4 lbs

Tool Warranty

Lifetime Lithium Ion

Battery Warranty

2-Year Lithium Ion

Charger Warranty

1-Year

View Manufacturer Website