Bluestreak Equipment Force 19
No Frills – Just Pick up Power
The Force is a Push Type Magnet with Maximum Pickup Power in a No Frills Design.
Gets the Job Done!
The Force is for those users who really care about pick up power and just getting the job done. It doesn’t have all the extra features just the basics, but it’s sturdy, rugged and gets the job done.
It doesn’t have the quick debris release lever, but you can wipe the debris off by turning it on its side and wiping the debris off with your hand from one end to the other.
It has three wheel height settings, steel ball bearing wheels, and a welded construction design.
Maximum lifting height – 6 ¼” (using a two and a half inch nail). “Wrap Around” feature holds onto nails and debris even if grass tries to wipe it off.
More Magnetic Power to Get the Job Done
Two powerful layers of permanently charged magnets generate super strong magnetic pull.
Extremely Quick and Easy to Use
"In the past, we have experienced many untimely and costly problems with puncturing tires in the forklifts on the shop floor. Since the arrival of the sweeper, we have seen a lot less screws and nails on the ground. Using the sweeper is extremely quick and easy, and therefore the employees tend to use it quite often. After a job run change over the employees like to use it to clean up because they don’t have to bend over and pick up the scrap off the floor. This in turn improves the over all appearance of the shop to the various visitors that walk through every day."
Schott Kochany
AST Enterprises
A Push Magnet that just gets the job done without all the extras.
The Force is for those users who really care about pick up power and just getting the job done. It doesn’t have all the extra features just the basics, but it’s sturdy, rugged and gets the job done.
It doesn’t have the quick debris release lever, but you can wipe the debris off by turning it on its side and wiping the debris off with your hand from one end to the other.
It has three wheel height settings, steel ball bearing wheels, and a welded construction design.
Recommended Industry Applications
- Construction Sites
- Roofing
- Fire Pit Cleaning for Parks
Sturdy Rugged Construction
Rugged three piece “Y” handle design for sturdiness and durability – provides good rigidity and a solid feel. Welded design for extra durability and long life.
Made in Canada
Made in Canada
All products proudly designed and manufactured in Canada
(since 2005).
Sweeping Height Control
Adjust the sweeping height for ground clearance in 1″, 2″ and 3″ increments. Height adjustment allows fine tuning of performance on a variety of terrains and conditions for optimum performance.
Large 7″ Steel Hub & Ball Bearing Wheels
Large 7″ steel hub and ball bearing wheels makes pushing the sweeper across rough terrain easy.
Available in 3 Sizes
Available in three sweeping width sizes, 19″ 25″ and 31″, to maximize efficiency and manoeuverability.
Additional Features
- Easy to store and transport to and from job sites.
- Stands up right on its own when not in use reducing the possibility of being driven over when not in use.
- Easily manoeuvers into tight spots and around building edges with rear offset wheels that allow magnets to get into corners.
- Rugged three piece "Y" handle design for sturdiness and durability.
- Rugged Durability. Welded design for extra durability and long life.
- Available in three sizes to maximize efficiency and manoeuverability.
- Two powerful layers of magnets generate super strong magnetic pull.
- Large 7″ steel hub and ball bearing wheels makes pushing the sweeper easy across rough terrain.
- Wrap around design prevents debris from being brushed off by grass once picked up.
Specifications:
Force Series™ |
Force 19 |
|
Sweeper Width |
19″ |
|
Ground Clearance |
1″ or 2″ or 3″ increments |
|
Cleaning Method |
Wipe off debris with glove or rag |
|
Lifting Weight (using 2.5″, 8 penny nails) |
12 lbs |
|
Height Adjustability |
Yes, 3 settings by moving axle hole position |
|
Housing Construction |
Aluminum 1/8″ walls |
|
Wheels |
7″ steel hub and ball bearing |
|
Magnetic Surface Area |
72 sq. inches |
|
Maximum Lifting Height (using 2.5″, 8 penny nails) |
6 1/4″ |
|
Total Sweeper Weight |
34 lbs |
|
Total Shipping Weight |
35 lbs |
|
Shipping Dimensions |
33″L x 9″W x 9″H |
|
Sweeper Handle |
3 pc aluminum |
|
Maintenance |
None |
|
Accessories |
None |
|
SKU |
F19 |