HILTI SIW 6AT-A22

SIW 6AT-A22

Cordl. impact wrench SIW 6AT-A22 bulk #2112642

Power-class 22V light-torque impact wrench with 1/2" detent anvil for anchoring and bolting

• Anvil type: 1/2" detent pin
• Maximum torque: 796.5 in-lb (1); 1194.75 in-lb (2); 1885.05 in-lb (3)
• Nut busting torque: 338 Nm

 

Features

• High-efficiency brushless motor means the tool lasts longer and gets more work done per charge
• Compact design for use wherever space is limited
• Three gears and electronic speed control for easy switching between different driving speeds and torque
• Four bright LEDs around the chuck provide direct illumination of the work surface
• Compatible with the Hilti SI-AT-A22 Adaptive Torque module for controlled fastenings

Applications

• Driving 6 mm and 8 mm HUS3 screw anchors in concrete
• Driving screws in HRD frame anchors 8 mm and 10 mm in diameter in masonry and concrete
• Driving lag bolts up to 8 mm in diameter in wood
• Driving lag bolts up to 1/2" in diameter
• Tightening and releasing nuts and bolts in sizes M8 to M16

Specifications: 

Anvil type	1/2" detent pin
Maximum torque	796.5 in-lb (1); 1194.75 in-lb (2); 1885.05 in-lb (3) 1
Nut busting torque	338 Nm
Bolt tension	95 Nm
Full hammering frequency	3500 impacts/minute
Number of gears	3
No load RPM	gear 1: 1000 rpm; gear 2: 1500 rpm; gear 3: 2300 rpm
Dimensions (LxWxH)	6.1 x 3.7 x 9 in
A-weighted emission sound pressure level	94 dB (A) 2
Rated voltage	21.6 V