Metabo (Hitachi) NP18DSALP4
NP18DSALP4 18V Lithium Ion 23Ga Pin Nailer (Tool Body Only)
Covered by Hitachi's Lifetime Lithium Ion tool warranty, the NP18DSALP4 (tool body only) Pin Nailer is taking fine finish carpentry to the next level. No longer will you have to worry about hoses and compressor for your 23-gauge pin nailer needs. It is equipped with a built-in counterweight that virtually eliminates all recoil, while reducing the force needed to actuate the tool. It also features a no-push work contact safety tip that reduces marring to provide a clean finish. Additional features include tool-less depth of drive adjustment, dry-fire lockout, on-tool battery indicator, belt hook, soft grip handle, and tool body rubber bumpers. The NP18DSALP4 is capable of driving approximately 3,000 pins with Hitachi's Compact 3.0Ah battery, allowing you to efficiently and comfortably complete any task. Available as a tool body only, this 23-Gauge cordless pin nailer drives pins in lengths of 5/8", 3/4", 1", 1-3/16" and 1-3/8" and can be used to produce nearly invisible holes for a variety of applications including cabinets, paneling, small molding and trim, glazed bead, craft work and picture frame assembly.
Features
- Available as Tool Body Only
- Tool body compatible with all Hitachi 18V Lithium Ion slide-type batteries for added convenience and versatility
- Built-in counterweight greatly reduces recoil
- Freedom from cumbersome air hose and compressor saves time in setup, during applications, and in jobsite clean up
- Slim nose design allows nailing into the grooves of any trim
- No-push safety nose tip reduces marring and provides a clean finish
- Tool-less depth of drive adjustment for a professional finish every time
- Dry-fire lockout for assured nail placement and preventing damage to work surface
- 3,000 nails per charge using Hitachi's Compact 3.0Ah Li-Ion battery ($39.97 every day retail)
- High-luminescence LED light is handy when working in low light areas
- Ergonomically formed soft grip handle provides comfort and ensures a secure hold
- Automatic power shut off after 30 minutes of inactivity, for added safety
- Low battery indicator light on tool allows the user to see battery power status to prevent unexpected downtime
- (2) No-mar nose caps for flat or angle pin driving
- Integrated belt hook can be mounted on either side of the nailer to accommodate left or right handed users
- Straight magazine holds 120 23-gauge pins in lengths of 5/8", 3/4", 1", 1-13/16" and 1-3/8"
- Tool body rubber bumpers protect the tool and any surface from damage
- Lightweight at only 4.4 lbs (w/battery) for balance, maneuverability and minimal user fatigue while ideal for overhead and extended use applications
Specifications
Voltage |
18 |
Battery Type |
Lithium Ion Slide-Type |
Battery Amp Hour |
n/a |
Battery Included |
0 |
Nail Gauge |
23-Gauge, Pin Nails |
Nail Length |
5/8", 3/4", 1", 1-13/16", 1-3/8" |
Magazine Capacity |
120 |
Magazine Angle |
0 Degree, Straight |
Battery Type |
Lithium Ion |
Belt Hook |
Variable Position |
Depth of Drive |
Tool-less |
Driving Speed |
2-3 Nails/Sec |
Nails per Charge |
Up to 3,000 |
Firing Modes |
Sequential |
Battery Charge Indicator |
Yes |
LED Light |
Yes |
Weight w/ BSL1830C battery |
4.4 lbs |
Weight w/out battery |
3.6 lbs |
Tool Warranty |
Lifetime Lithium Ion |
Request information about Metabo (Hitachi) NP18DSALP4
Call here for more information about Unit#: NP18DSALP4
Or fill out the form below