Bluestreak Equipment Atmos 52
A Shotblasting Magnetic Sweeper Designed for Heavy Use on Large Areas.
The Atmos is a Continuous Discharge Magnetic Sweeper For Shotblasting Surface Preparation Operations
Flexible Design for Double Duty!
The Atmos is specifically designed for heavy use on large areas by shotblasters who need to pick up steel shot of all sizes. The Atmos is designed with Bluestreak’s patented Ripwhirl Technology to continuously clean shot off its magnetic drum and deposit the shot into an onboard removable debris tray as you push the sweeper.
Because the drum continuously cleans off the magnet, you always have full pickup strength increasing the effectiveness of shot pickup. The magnetic drum features a new durable one piece extruded PVC design for long lasting wear.
The Atmos features a flexible design. It easily converts from a tow behind magnet to a push type magnet simply by flipping the handle. Tow the Atmos behind vehicles and equipment to cover a lot of ground faster. Or push the Atmos by hand like a regular push type magnet.
Automatic Continuous Discharge System
A Shot Blasting Magnetic Sweeper with a Continuous Discharge Clean Off System
Continuously cleans shot off the magnetic drum and deposits shot into an on board removable debris tray as you push the sweeper.
Easy to use and operate
There is a real improvement experienced by the operator because there is not as much bending over involved. Each of the 2 trays hold 42 lbs of shot, it’s easy to see when the tray is full. When it’s full the handle is easy to grab and you just dump it into whatever you want.
The sweepers are so easy to use that it turns an undesirable job into one that no one minds doing. It’s like using a power circular saw versus a handsaw.
Two tray collection system
Each of the 2 trays hold approximately 42 lbs of steel shot allowing you to go further before emptying the trays.
Purchase 2 additional trays as an accessory to make a total of 4 trays to extend your sweeping time before having to empty the tray.
Recommended Industry Applications
- Shot Blasting
The Atmos on a road reconstruction site in the Sanriku district in Japan after the Great East Japan Earthquake of 2011.
Two in One Flexible Design!
The Atmos is a push type magnet and tow behind magnetic sweeper in one package. It easily converts from one to the other by simply flipping the handle.
Made in Canada
Made in Canada
All products proudly designed and manufactured in Canada
(since 2005).
Recover A Lot of Shot of All Sizes Very Quickly
Increase Your Productivity.
The Atmos cleans up the same size of area faster than a traditional magnetic sweeper. Real world comparisons show that the Atmos is 5 times faster at cleaning up shot than a traditional sweeper.
Pick up Shot from 1 3/4" below wheels
The Atmos picks up 100% of steel shot from 1 3/4″ below the wheels, that means it can pick 100% of steel shot from out of cracks 1 3/4″ deep. It can pick up shot from deeper cracks but gets less and less of it as the depth increases. This allows you to thoroughly clean out cracks and expansion joints which results in less shot showing up in the finished floor coating which has a direct effect on the quality of the finished floor.
Additional Features
- Automatic Continuous Discharge System.
- Two Tray Collection System - Each of the 2 trays hold approximately 42 lbs of steel shot allowing you to go further before emptying the tray.
- Long Maintenance Free Life - N42 rare earth magnets won’t lose their strength over time and are permanently charged.
- Converts to a tow behind by flipping the handle.
- Increase your company’s adaptability / flexibility to economic cycles: When you’re really busy the Atmos allows you to get the job done faster with the same amount of staff without hiring and when things slow down you won’t have too many staff.
- 5 Times faster at cleaning up shot than a traditional magnetic sweeper.
- Light Weight - 114 lb sweeper weight is easy to load into a truck. Easy to operate and transport.
- Completely seeled magnetic drum won’t allow shot inside.
- Non-marking Thermoplastic rubber wheels with sealed bearings won’t leave marks on floor surfaces and no dust or grit can get into the bearings.
- Reduced Long Term Cost: The Atmos is designed to last. And because of the quality of its design and construction and because of the availability of replacement parts when needed you can keep your Atmos going for years resulting in lower long term costs of ownership compared to many cheaper magnetic sweepers.
- 8" wheels have a 700 lb rating each with a 5/8″ precision ball bearing and rugged polypropylene hubs.窶�
Specifications:
Atmos Series |
Atmos 52 |
|
Sweeper Width |
52″ |
|
Ground Clearance |
0.340 inches at lowest fin point |
|
Cleaning Method |
Automatic Continuous Discharge |
|
Lifting Weight (using 2.5″, 8 penny nails) |
N/A |
|
Height Adjustability |
None |
|
Housing Construction |
New Design! One Piece Extruded PVC Design |
|
Wheels |
|
|
Magnetic Surface Area |
N/A |
|
Maximum Lifting Height |
Will pick up 100% of shot from 1 3/4″ below wheels, and decreasing percentage of shot as floor cracks get deeper. |
|
Total Sweeper Weight |
118 lbs |
|
Shipping Dimensions |
64″L x 21″W x 11″H |
|
Maintenance |
None |
|
SKU |
AT52 |
|
Shipping Weight |
127 lbs |