Rack Protection
Rack Aisle Protectors
Effective protection close to the ground, Cogan rack protectors shield sensitive rack-aisle-ends from warehouse traffic. Prevent collision damage should a fork truck or other in-plant vehicle steer off-course and accidentally bump the racking. When properly anchored to the floor, Cogan rack protectors help guard your investment without interrupting aisle flow patterns or limiting access to your pick area. Choose from 2 levels of protection to best suit your needs.
Rack Post Protectors
Rack posts, the most important part of any racking system, are also the most vulnerable. It only takes one damaged rack post to compromise the structural integrity of an entire racking unit. Exposed on the corners of busy aisle ends, rack posts can be easily struck by a forklift or other in-plant vehicle. Repairing damaged racking is both expensive and time-consuming. Stored materials must be removed and kept elsewhere, while the damaged components are replaced. Your operations are interrupted causing costly downtime.
Easy-to-install and economical, our rack post protectors provide just the right amount of protection around individual racking posts. The structural steel design wraps around the full circumference of the rack post to completely shield it from impact. Your racking will remain intact and your workflow productive.
Cogan rack post protectors are available in three standard sizes to accommodate a range of racking systems. Custom size are also available. All Cogan rack post protectors are sealed in a durable, powder-coated yellow paint finish for maximum visibility.
Wire Mesh Rack Guards
Form a sturdy wall of protection between your employees and your inventory with Cogan wire mesh rack guards. Rigid and resilient, our rack guards bolt directly to pallet uprights, effectively placing a barrier between stored materials and the picking aisles below. Your workers will remain safe from falling debris should a forklift bump the racking or if a pallet breaks.
Boasting an exceptional all-welded angle-frame, our rack guards are engineered tough for dependable, long-lasting protection. Rugged 2” x 2” x 10GA welded wire mesh panels are wear-resistant to meet the rigorous demands of industrial use. The wire mesh construction also means your inventory is visible at all times, allowing for fast visual assessment and proper ventilation. Simple nut-and-bolt assembly makes installation quick and easy to minimize costs and maximize savings. All Cogan wire mesh rack guards are sealed in a durable powder-coated paint for a maintenance-free finish.
Cogan rack guards can be ordered with flush or offset mounting brackets to accommodate pallet overhang. If rack guards must extend above the top of the racking, we also offer a special angle bracket to support the exceeding panels. This means our rack guards will always fit the full-height of your rack frame to prevent product and pallet spills. Costly replacement expenses will be limited, while employees working near the racking or walking through pallet aisle ways will remain protected. Two types of mounting brackets are available to accommodate both roll-formed and structural rack uprights.
Floor Angle Guide
Cogan floor angle guide provides continuous, uninterrupted protection low to the ground. Easy-to-install and cost-effective, our floor angle guide keeps traffic away from critical rack supports, pallet flow rails, walls, offices, storage partitions, and other work areas. Cogan floor angle guide can also be used for narrow aisle storage applications. Use them to prevent narrow-aisle fork trucks, lifts and order pickers from coming into contact with the rack. Your racking remains intact and your assets undamaged.
Available in standard lengths up to 20’L, our floor angle guide is ideal where long, straight sections of protection are required. Made from 5” x 3” x ¼” structural angle, the sturdy all-steel construction stands up to warehouse traffic. All Cogan floor angle guide is sealed in a durable, powder-coated safety yellow paint finish for maximum visibility.