Stump Grinder
STX-26
Toro STX-26 Stump Grinder
- Intelli-sweep® automatically adjusts cutting head sweep speed
- Turn stumps to chips quickly
- Hydraulically driven cutting head
- No tire ruts or flat tires
Overview
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity. The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, and no adjusting tension - guaranteeing optimal performs time after time.
Specifications
Cooling System | Air Cooled |
---|---|
Cutter Depth - Above Grade | 33 in. / 83.8 cm |
Cutter Depth - Below Grade | 12.5 in / 31.8 cm |
Engine Horsepower | 26.0 hp |
Engine Make | Kawasaki |
Engine Model | FX-730V Twin Cylinder |
Fuel Type | Gasoline |
Head Swing | 47" (119.3 cm) arc length x 90˚ sweep arc |
Height | 46 in. / 116.8 cm |
Length | 78 in. / 198.1 cm |
Start Method | Electric |
Transmission | Hydrostatic |
Travel Speed - Forward | Up to 4.2 mph / 6.7 kph |
Weight | 1,200 lbs / 544 kg |
Wheel | 19" (48.2 cm) diameter to tooth: .75" (1.9 cm) thick: 12 grinder teeth |
Width | 34 in. / 86.3 cm |
×
Request information about STX-26
Call here for more information about Unit#: STX-26
Or fill out the form below