The Gehl RT105 Compact Track Loader is taking performance to the next level.
Height to Hinge Pin - Fully Raised (mm) | 109" (2769) |
The extra-large, state-of-the art operator’s station on the RT105 Track Loader is designed for optimal operator comfort resulting in more productivity.
Controls on the Gehl RT105 Compact Track Loader are ergonomically designed to reduce operator fatigue, increase productivity and improve versatility.
The RT105 engine is packed with plenty of low-end torque, just what a track loader needs to power through the toughest jobs.
Make/Model | Yanmar/3TNV88C-KMS Tier IV |
Type | 4-Stroke Naturally Aspirated |
Displacement/Cylinders (L) | 100 cu.in. (1.64 L / 4) |
Gross Power (kW) @ rpm | 35 hp (26) @ 2800 |
Peak Torque (Nm) @ rpm | 80 ft.-lbs. (109) @ 1820 |
Alternator Voltage/Amperage | 12V/55A |
The RT105 Compact Track Loader hydraulic system is engineered to push more material, lift heavier loads and power demanding attachments.
Auxiliary Hydraulic Flow - Rated Speed (L/min) | 14.5 gpm (55) |
Transmission Pump Type | Axial Piston |
Motor Type | Radial Piston |
The RT105 Compact Track Loader is available with your choice of two attachment mounting systems designed to enhance jobsite efficiency.
The robust lift-arm on the RT105 Compact Track Loader is designed for optimal strength, visibility and capacity.
Height to Hinge Pin - Fully Raised (mm) | 109" (2769) |
Reach - Fully Raised (mm) | 26.5" (673.1) |
Dimensions |
|
---|---|
A Overall Operating Height - Fully Raised | 143.7" |
B Height to Hinge Pin - Fully Raised | 109" |
C Reach - Fully Raised | 26.3" |
D Dump Angle - Fully Raised | 38° |
E Dump Height - Fully Raised | 84" |
F Maximum Rollback Angle - Fully Raised | 102° |
G Overall Height at ROPS | 71.5" |
H Overall Length with Bucket - Standard Counterweight | 117.5" |
I Overall Length without Bucket - Standard Counterweight | 88.9" |
J Specified Height | 57.7" |
K Reach at Specified Height | 39" |
L Dump Angle at Specified Height | 72° |
M Maximum Rollback Angle at Ground | 32° |
N Carry Position | 5" |
O Maximum Rollback Angle at Carry Position | 32° |
P Digging Position - Below Ground | 0" |
Q Angle of Departure with Standard Counterweight | 35° |
R Ground Clearance | 7.5" |
S Track Gauge | 40.9" |
U Crawler Base | 50.5" |
V Overall Width - Less Bucket | 50.8" |
W Bucket Width | 54" |
X Clearance Radius - Front With Bucket | 73" |
Z Clearance Radius - Rear with Standard Counterweight | 50.8" |
Capacity |
|
Operating Capacity at 35% Tipping Load | 1,050 lbs. |
Operating Weight | 4,720 lbs. |
Engine |
|
Make/Model | Yanmar/3TNV88C-KMS Tier IV |
Type | 4-Stroke Naturally Aspirated |
Displacement/Cylinders | 100 cu.in./4 |
Gross Power @ rpm | 35 hp @ 2800 |
Peak Torque @ rpm | 80 ft-lbs |
Alternator Voltage/Amperage | 12V/55A |
Track Drives |
|
Track Type/Track Rollers/Roller Type | Rubber/3/Steel |
Track Width | 9.8" |
Volume |
|
Fuel Tank | 9.5 gal. |
Hydraulic Reservior Tank | 8 gal. |
Coolant Capacity | 1.75 gal. |
Hydraulics |
|
Auxiliary Hydraulic Flow - Rated Speed | 14.5 gpm |
Transmission Pump Type | Axial Piston Variable Double Pump |
Motor Type | Radial Piston Motor w/ Two Speed |
Electronic System |
|
Battery Volts | 12V |
Cold Cranking Amps at Temperature | 800 CCA @ 0°F |
Sound & Vibration |
|
Sound Power (Environmental) | 101 dB(A) |
Operator Ear | 85 dB(A) |