Telehandlers | Equipment World

Rear axle stabilization system locks the rear axle to the frame if the parking brake is engaged, if the boom is raised 60 degrees or higher, or if the PWP System is activated.
10-degree frame tilt in both directions.
Double universal joints for tight turn radius without applyingstress on the axle.
Two-wheel, four-wheel, crab steering standard.
Standard centrifugal pre-cleaner and two-stage air cleaner.
Powershift transmission with four forward and two reverse gears, with a 2-year/2,000-hour warranty.
Standard pneumatic tires.
ROPS and FOPS certified operator's compartment.

Power (kW)	120 hp (89)
Maximum Travel Speed (km/hr)	22.8 mph (36.7)
Turning Radius (m)	12'2" (3.7)
Lift Capacity (kg)	12,000 lbs. (5444)

Operator's Cabin

Comfort comes standard on the DL12-40 GEN:3 Telescopic Handler, boasting 57 cubic feet of interior space.

GEN3 F-N-R Single Joystick that allow operators precise movement of heavy loads
Lockable, two-piece cab door for security, communication and cross-ventilation.
Standard lockable storage compartment for service items, such as work gloves, tools, blueprints and more.
Choice of canopy or cab with heating and defrosting systems standard (air-conditioning optional).
Un-matched panoramic visibility increases work-site safety and operator productivity and reduces operator fatigue.

Gehl DL12-40 GEN3 Operator's Station Controls

Handling

Gehl DL12-40 GEN3 DL Series Steering

Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
Industry loading job site maneuverability with a 12' 2" turning radius.

Engine

Gehl DL12-40 GEN3 DL Series Engine Access

The DL12-40 GEN:3 Telescopic Handlers provides the power to get work done effectively and efficiently.

Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for loading or repair.

Manufacturer	Cummins
Model	3.8L QSF Tier IV
Power (kW)	120 hp (89)
Maximum Travel Speed (km/hr)	22.8 mph (36.7)

Hydraulics

The DL12-40 GEN:3 Telescopic Handler has the hydraulic power to get the job done.

Pump Type	Open-Center, Dual-Section
Total Capacity (L/min)	43 gpm (162.8)
Main Relief Pressure (bar)	3,000 psi (207)
Auxiliary Relief Pressure (bar)	2,500 psi (172)
Hydraulic Reservoir Capacity (L)	45 gal. (170)

Gehl DL12-40 GEN3 Telehandler Hydraulics

Attachments

DL Attachments

There is a tool for every job, and the DL12-40 GEN:2 can power them all. The DL units feature three attachment options: Dynattach®, Dynacarrier, and Dynacarrier with hydraulic locking.

A	Carriages – Masonry, framing and standard carriages available in different widths.
B	Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C	Fork Shift - 48" (1219 mm) wide.
E	Swing Carriage – 90° and 180° swing.
F	Log and Pipe Grapple.
G	Jib Boom - 5' (1.5 m) with winch and 60' (18.3 m) cable.
H	Truss Boom - 12' (3.6 m) and 15' (4.5 m) with optional winch.