Gehl RS5-19 GEN:3 OR SIMILAR
Call to Book - 705-949-7379
Rental Rates:
Contractor/Company discounts not reflected. Pricing not guaranteed, call for exact pricing.

Day Rate: $600.00
Week Rate: $1,425.00
Month Rate $3,800.00
TELFORK5.5
Telehandlers
Type
5,500 lbs
CAPACITY/HEIGHT/SIZE

More about: Gehl RS5-19 GEN:3


Performance

Gehl RS5-19 Forklift

The RS5-19 GEN:3 is built to work hard. 

  • Compact size 5' 11" wide & 6' 4" tall
  • Total weight of 10,000 lbs
  • With a ground clearance of 14"
  • Two section telescopic boom has full hydraulic power for all lift and telescopic functions
  • Hydraulic self-leveling lift action automatically keeps the load level as the boom is raised.
  • Inboard wet-disc service brakes
  • Limited slip differential is located on front axle.
  • Highly visible boom level indicator is located on the outer boom and an easy-to-read frame level gauge is located in the cab
System Pressure (bar) 3,350 psi (231)
Hydraulic System Total Capacity (L/min) 20 gpm (83)

Operator's Cabin

The operator’s cab in the RS5-19 GEN:3 Telescopic Handler is anything but compact. A modern, ergonomic design maximizes comfort.

  • High-back seat with right-side adjustable armrest; suspension seat optional.
  • Locking storage compartment under seat.
  • Full 360° visibility.
  • Ergonomic design features all gauges, indicator lights and switches on the right-side dash panel
  • ROPS/FOPS canopy standard; ROPS/FOPS cab with heater  or ROPS/FOPS cab with heater & A/C optional

Handling

Gehl RS5-19 Telehandler Crab Steering

To enhance maneuverability, the RS5-19 Telescopic Handler has three steering modes. An operator can change between 2-wheel, 4-wheel and crab-type steering by flipping a switch in the operator’s station.


Engine

The RS5-19 GEN:3 Telescopic Handler has the power to get work done effectively and efficiently.

  • Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair.
  • Rexroth 2-speed hydrostatic transmission.
  • Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
Manufacturer Yanmar
Model 4TNV98C Tier IV
Power (kW) 69 hp (50.1)
Maximum Travel Speed (km/hr) 15 mph (24)
Rated Speed 2,500 rpm

Gehl RS5-19 Engine Access


Hydraulics

Gehl RS5-19 Telescopic Handler Hydraulics

The model RS5-19 GEN:3 makes no exceptions when it comes to hydraulic performance.

Pump Type Gear
Total Capacity (L/min) 20 gpm (83)
System Pressure (bar) 3,350 psi (231)
Hydraulic Reservoir Capacity (L) 18 gal. (68)

Attachments

There is a tool for every job, and the RS5-19 GEN:3 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift - 50" (1270 mm) wide.
D Truss Boom- 5' long.
E Bucket - Light Material - 71" wide.

RS Attachments

 


Serviceability

Gehl RS5-19 Crane Service Access

The RS5-19 GEN:3 Telescopic Handler has an intelligent design that protects components and provides easy access for routine maintenance.

  • The engine hood lifts fully out of the way, providing easy access to the battery and engine maintenance
  • A hinged access door provides easy access to the engine oil drain
  • Hydraulic oil fill cap is located on the top of the engine compartment for easier access, with a spill guard for extra protection
  • A protective sleeve over the exhaust pipe increases safety when working on the engine
  • A dual-element air filter protects the engine from airborne contaminants